Corsa Racing Kart
flag top
 
italiano
 
english
 
 
 
 
 
 
 
 
flag bottom
 
Restricted area
User
 
Password
 
 
where
 
TECHNICAL TIPS
SUPPORT
Corsa Racing Kart
sub menu
where
 
 
top
 
30mm REAR AXLE MOUNTING INSTRUCTIONS

Certain steps have to be followed when mounting a 30mm rear axle to make sure it will not move.

Before fixing the axle, make two small holes (4.5mm) with the drill bit to make sure the grup screw goes perfectly into the hole and does not move.

You can now proceed and strongly tighten-up the grub screws into the axle; this operation will prevent the axle from moving and consequently cause mechanical problems or a poor chassis performance.

Also you may use a very small point of BLUE “Locktite” to prevent vibrations from unscrewing the grub screws (DO NOT EVER use red Locktite).


settings




 
footer
 
 
Vat number 02026570982
Legal Notice - Privacy Policy - Copyright Corsa Racing Kart 2012 - all rights reserved -
footer